MOTO GUZZI V1000 G5 Owner's Manual page 18

16
"A .. (fig . 4) the engine is ready to be started .
To sta rt the eng ine proceed as follows :
- u:su re switch «8 .. is in position «1 .. (run );
- pu i: the clutch lever completely ;
- on a cold engine bring starter lever «8 .. in
tile start position (fig . 28) ;
-- pr€s s start button «A .. (start) .
To stop the engine in case of an emergency :
.. - ~ hift switch «8 .. to position «2 .. (OFF) .
Aft er stopping the engine, turn ignition key (fig. 4)
antic lockwise until mark «OFF .. is in line with the
mark on the panel and take out the key.
Easy start lever on carburettor
(fig . 28)
This lever for starting a cold engine is located
near the left cylinder head cover :
«8 .. Start position .
«C .. Riding position.
Throttle grip control
(<< E .. , fig . 7)
Right, on the handlebar. Throttle is opened by
turning towards the rider and closed viceversa .
Clutch control lever
Left , on th e hand lebar. Use it only for engine
starting and gearshifting .
Right front brake control lever
(" F .. , fig . 7)
Right, on handlebar. This lever is suitably con -
nected to th e master cylinder and operates on
right front bra ke disc.
Twin brake control, front left
and rear brakes
(fig . 16)
The control pedal is located on the right side of
the motorcycle and is linkconnected to the fluid
reservoir (master cylinder) group .
It operates both front left and rear brakes at the
same time.