MOTO GUZZI V1000 G5 Owner's Manual page 52

50
Tail lamp (fig. 35)
Undo screws «0» securing reflector to tail light.
push bulbs inwards turning them to the left, and
slip them out.
Turn signal bulbs (fig. 35)
Undo screws «E» securing the reflectors to the
lamps . push bulb inwards and turn it to the left,
slipping it off.
In re-fitting the reflectors, screw in uniformly and
moderately to prevent breakages.
34
35
Number plate light (fig. 35)
Undo screws «F» securing the transparent reflec-
tor, push the bulb inward turning it to the left.
and slip it out the holder.
Instrument panel, tachometer, and rev-counter
Slip the bulbs off their sockets and replace them.