Removal Of Wheels - MOTO GUZZI V1000 G5 Owner's Manual

32
REMOVAL OF WHEELS
Front wheel
(fig. 21)
To remove the front wheel, operate as follows:
• undo scews «F" and «G" securing caliper «A "
to the left fork cover. Now tak e out caliper from
the brake disc by lifting it slightly;
• undo spindle retaining nut " 8 ,, on the righ i
side;
• undo screws
"e"
fixing fork covers to spindle;
• withdraw spindle «D,,;
• lift up th e front part of the motorcycle just
sufficiently to allow the brake disc to be taken
out of the caliper still mounted on the right fork
cover.
Re-fitting is a reversal of the removing operation
but particular attention should be paid to the po-
sition of spacer " E" on the right.
Rear wheel
(fig. 22)
To remove the rear wheel, proceed as follows:
21
• undo the screws securing the muffler to frame
(left), loosen the strap securing screw, and take
out the muffler from the exhaust pipe;