Installing The Toner Bottle - Konica Minolta bizhub 162 Installation Manual

5. Press the M key two times.
4506U156AA
6. Press the Yes key.
4034IXE001DA
7. After the ATDC Sensor adjustment procedure has
been completed, open the Front Door and enter
the ATDC level setting value displayed on the
screen in the Adjust Label.
(Adjustment time: 3 min.)
IX. Installing the Toner Bottle
1. With the seal on the Toner Bottle facing up, slowly
peel off the seal as illustrated.
Note:
Slowly peel off seal, as some toner may puff out
from the bottle.
C4506O009AA
2. Open the Front Door.
3. Swing open the Bottle Holder to the front and
position the Toner Bottle.
Note:
Make sure that the UP marking faces up.
4506U022AA
4. Tap the bottom of Toner Bottle three to four times.
4506U159CA
E-7
1139O139OA
4021U014AA
4021O243AA