Table of Contents
Advertisement
ACS-1208A / ACS-1216A User Manual
Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 4-9) can be Hotkey toggled On and
Off. To toggle the Beeper, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 3-1).
2. Press [B]
After you press B, the Beeper toggles On or Off. The Command Line
displays Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
3-6
[Num Lock] + [*] or
[Port ID] [Enter]
[Num Lock] + [-]
[T] [n] [Enter]
[A]
[←]
[→]
[↑]
[↓]
[B]
2003-06-20
Switches access to the computer that
corresponds to that Port ID.
Sets the Auto Scan interval to n seconds -
where n is a number from 1 - 255.
Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P] or
Left Click pauses Auto Scanning. Pressing
Any Key or another Left Click resumes Auto
Scanning.
Invokes Skip Mode and Skips from the
current port to the first accessible port
previous to it.
Invokes Skip Mode and Skips from the
current port to the next accessible port.
Invokes Skip Mode and Skips from the
current port to the last accessible port of the
previous Station.
Invokes Skip Mode and Skips from the
current port to the first accessible port of the
next Station.
Toggles the Beeper On or Off.
Advertisement
Table of Contents
