Table of Contents
Advertisement
(F4 ADM: continued)
Setting
RESET
If you change the position of one of the Stations in the daisy
STATION IDS
chain, the OSD settings will no longer correspond to the new
situation. This function directs the OSD to rescan the Station
positions of the entire installation and updates the OSD so
that the OSD Station information corresponds to the new
physical layout.
Note: Only the Station Numbers get updated. Except for the
Port Names, all Administrator settings (such as Set Accessible
Ports, Set Quick View Ports, etc.), for all of the computers
affected by the change, have to be manually redone.
FIRMWARE
In order to upgrade the ACS-1208A / ACS-1216A's firmware
UPGRADE
(see Chapter 5), you must first invoke Firmware Upgrade
Mode with this setting.
2003-06-20
OSD Operation
Function
4-11
Advertisement
Table of Contents
