Packing Checklist Reversible Auto Switch, AS-154P User’s Manual, AS-154P 3.5” Floppy wm-m@,“hv- mm-” 0 Copyright 1997 ATENO International Co., Ltd Manual Part No PAPE-- 1042.600 All brand names and trademarks we the regIstered property of their respective owners REVERSIBLE l-IN-4-OUT...
Page 2
For I-IN-4-OUT Mode Note: (I) FormFeedselection and Timeout selection are not uvuilable in 1 -to-4 mode (2) To function properly, ull printers must be powered on or AS-154P be powered by on udopter Set up the slide switch before AS-154P AS/2 WARE can file for detail.
Page 3
To connect PCs to AS- 154P use DB-25 male-to-male cables. To connect AS-154P to printer, use 25pin-to-36-pin male-to-male cable. Turn on all PCs and printer and AS-154P is ready. * Scanning LED indicating AS-154P is in Auto Link mode. * Non-scanning LED indicating AS154P is in Manual mode or prints data in Auto mode.
Page 4
Turn off all printers and PC. To connect PC to AS-154P use DB-25 male-to-male cable. To connect AS-154P to printers, use 25pin-to-36-pin male-to-male cables. Turn on all printers and PC, and AS-154P is ready. (1 TO Fig. B I-IN-4-OUT configuration...
SOWS. It is compatible with Cenmmics pwatlel, yet protides enhanced features such as bi-directional communication higher data throughput and printer control. Reversible function help to solve the problem between multtple wx, and multiple periphcnds at minimum cost. AS-154P .,,, ~~-- si g nal to another.
PREVENTING RADIO & TV INTERFERENCE WARNING!!! This equipment has been tested and found to comply with limits for a Class 6 digital device, pursuant to Part 15 of the FCC Rules. provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the AS-154P and is the answer not in the manual?
Questions and answers