To Set The Chart Plotter For Receiving Ais; Ais Menu - Si-tex SNS-1100 User Manual

Depending on the scale the presentation of the Targets change to remove clutter on the
screen.
This information is updated every 3 seconds to 6 minutes depending on speed and rate of turn,
enabling the track of the vessels in range to be plotted.
3.7.1.a Color Legend for AIS Targets
NOTES
triangle icon color is selected according to declared ship type;
smaller triangle is displayed for anchored/moored targets or when their speed less than 2
knots
3.7.2 To set the chart plotter for receiving AIS
Make sure that the AIS receiver is properly connected to the chart plotter.
The chart plotter reads the AIS NMEA message VMD, type 1, 2, 3, 4, 5, 9, 11, 18, 19, 21 and
24.
Select the used serial port and transmission speed by following the procedure:
[MENU] + "Advanced Options" + [ENTER] + "Input/Output" + [ENTER] + "Port n Input" + [ENTER]
+ "AIS 38400" + [ENTER]
Where:
n = 1/2/3/4/5 for SNS 700e/SNS 1100
n = 1/2/4/5 for SNS 700i
n = 1/3/4/5 for SNS 700fe
n = 1/4/5 for SNS 700fi
3.7.3

AIS Menu

To configure the chart plotter to receive AIS data, follow the procedure:
[MENU] + "AIS" + [ENTER]
Fig. 3.7.1 - AIS Symbols
User Manual - 55