Other Map Configurations - Si-tex SNS-1100 User Manual

Palette
[MENU] + "Map Options" + [ENTER] + "Palette" + [ENTER]
It is possible to set the palette used to enhance the visibility of the screen depending on the
surrounding light condition. The possible choices are listed in the table below:
Normal
It is recommended when the chart plotter is not exposed to the direct sunlight.
When this mode is set the maps are displayed in order to use colors as similar
as possible to the ones used in the original paper charts.
Sunlight
It is designed to enhance the visibility of the screen when the chart plotter is
exposed to the sunlight. The maps are much brighter than in the other modes
and the depth areas are filled with white color so different depth areas are not
easily distinguishable.
Night Vision It is recommended when the environment is dark in order to reduce the glare
of the display. The chart plotter displays maps and screen in darker colors.
NOAA Allows setting NOAA paper chart colors presentation.
Satellite Imagery
[MENU] + "Map Options" + [ENTER] + "Satellite Imagery" + [ENTER]
It is possible to overlay the Satellite image for background map. When it is set On, the Palette is
set to Normal to display the proper colors.
Currents Prediction
[MENU] + "Map Options" + [ENTER] + "Currents Prediction" + [ENTER]
A window is shown on the low-left side of the chart. It is possible to see the variation of the Tidal
arrows on the selected area at any given time. Press [Set] to set the date and time manually,
press [Incr]/[Decr] to increase/decrease time and [Exit] to exit.
3.3 OTHER MAP CONFIGURATIONS
[MENU] + "Map Options" + [ENTER] + "Other Map Configurations" + [ENTER]
Allows the user to customize the following selections and is divided into: Marine Settings, Depth
Settings, Land Settings, Underwater Objects Settings and Chart Settings.
Display Mode
[MENU] + "Map Options" + [ENTER] + "Other Map Configurations" + [ENTER] + "Display Mode"
+ [ENTER]
Selects from a predefined table what cartographic objects are displayed and which display
options are set. Pre-programmed settings are user selectable from Full, Medium, Low, Radar,
Tides, Custom. The table below shows the selections for each mode.
44 - User Manual