Si-tex SNS-1100 User Manual page 27

Table of Contents

Advertisement

With the Route shown on the Chart page, move the cursor to the starting Waypoint in the Route
and press [ENTER], select "GOTO" and press [ENTER] again.
SNS 1100:
move the cursor to the starting Waypoint in the Route and press [GOTO].
The destination is placed on the Waypoint of the selected Route and you are now navigating to
it. Press softkwys Forward or Backward to select direction of following the Route
Inserting Waypoint
To insert a new Waypoint between two existing ones:
Place the cursor on the desired Route leg + [Insert] + move the cursor to the new position +
[ENTER]
The new Waypoint is placed.
To add a new Waypoint to the last Waypoint of the Route:
Place the cursor + [ENTER] + "WAYPOINT" + [ENTER]
Reversing Route
To generate a new route reversing an existing one.
If in Route Data Report page:
[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [Reverse]
The Route is then followed in reverse order, with Waypoints renumbered accordingly. If the
destination is placed on the Route, that Route cannot be reversed.
Selecting Route Report page
To give information on Waypoints belonging to the selected Route:
[MENU] + "Route" + [ENTER] + "Report" + [ENTER]
In this page it is possible to modify the Speed and Fuel consumption values:
[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [Speed]/[Fuel] + use the cursor to insert
values + [ENTER]
Sending Route
To transmit the Active Route information onto the NMEA output port.
[MENU] + "Route" + [ENTER] + "Send" + [ENTER]
The NMEA WPL & RTE messages are sent to the output port.
Receiving Route
To save Route information received from the NMEA input port.
[MENU] + "Route" + [ENTER] + "Receive" + [ENTER]
The received route is saved on the Active route, overwriting it. The NMEA WPL & RTE messages
are sent to the input port.
Safe Route Checking
This function checks the presence of particular cartographic objects (see the list below) on a
range set by the user for all Route legs:
• Land Areas
• Shallow Water
• Intertidal Areas
• Rocks
• Wrecks
• Obstructions
• Shoreline Constructions
User Manual -
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sns-700

Table of Contents