Rounding Switch; Grand Total / Tax Rate Set Switch; Item Count Switch - Canon MP37-MG User Manual

ROUNDING SWITCH

– Used for round-up [

GRAND TOTAL / TAX RATE SET SWITCH

GRAND TOTAL
– When the calculations are performed with the GT switch set to
TAX RATE SET
– Set switch to "TAX RATE SET" for setting or recalling the TAX rate.

ITEM COUNT SWITCH

– At "n+" or "n+/–" position, the calculator counts and print the
the pre-selected decimal digits in the result.
"ON", the total(s) are accumulated in the grand total memory.
Each time is pressed, the subtotal number is printed with the
symbols G+. When
printed with the symbols G
grand total followed by the symbols G .
number of calculation items up to 999.
< ITEM COUNT >
When the "ITEM" switch is set at "n+", the calculator counts the
number of times the + and – keys are pressed.
When the switch is set at "n+/–, the calculator counts the
number of times the + key is pressed and subtracts from the
total numbers of times the – key is pressed.
< MEMORY ITEM COUNT >
When the "ITEM" switch is set at "n+", the calculator counts
number of times
When the switch is set at "n+/–, the calculator counts the
number of times the
total number of times the
< PRINTOUT OF ITEM COUNT >
When the PRINT switch is turned "ON", and the "ITEM" switch is
at the "n+" or "n+/–" position, the number of items recorded by
the counter can print up to three digits on the left-hand side of
the paper by pressing either the
count and key or
] , round-off [5/4], or round-down [
is pressed, the intermediate grand total is
. Press
and keys are pressed.
key is pressed and subtracts from the
key is pressed.
key or the
key for memory item count.
- 4 -
successively to get the
key for item
] to