Cutting-Edge, Network Based Control Panel System - Ikegami HDK-790EXIII Manual

Cutting-edge, Network based Control Panel System

The OCP-200 / MCP-200 is a new Network based control panel system offered as an alternate to the traditional Ikegami
style control panels. The Network system allows any OCP-200 to control any camera with assignment set at the OCP
itself. System wiring is simplified with control of up to 96 cameras via a single coax cable between CCU locations and
video control locations. The OCP-200 and MCP-200 include touch screen LCDs. The depth-of-control of the OCP-200 can
be selected from basic to complete to fit the customers' operating discipline. Conventional one by one camera control
connection is also available.
CCUs
POV camera
CCUs
Expanded network configuration. New CCU-890 and BS-89 can connect directly to the network.
BSH-200
Network configuration including POV cameras. BS Hub integrates existing CCUs, Base Stations,
and POV cameras. CP Hub powers and distributes data to up to eight (8) control panels.
CPH-200
Operating Position #2
CPH-200
Central Maintenance Position
CPH-200
CPH-200
OCPs
Operating Position #1 OCPs
OCPs
Coax Cable
CP Cable
Coax Cable
CP Cable