Cadillac Escalade EXT Owner's Manual page 357

$10araEscaladeEXT Page 357 Wednesday, October 14, 2009 9:54 AM
Taillights, Sidemarker Lights,
Stoplights, Back-up Lights and
Rear Turn Signals
1. Open the tailgate.
2. Remove the screws and pull
out the light assembly.
3. Turn the socket counterclock-
wise and remove it.
4. Pull the bulb straight out to
remove it from the socket.
5. Press the new bulb into the
socket and turn the socket
clockwise into the housing
until it clicks.
6. Reverse the steps for
installation.
Section 4
License Plate Lights
1. Reach up behind the rear
bumper to remove the bulb
socket from the lamp housing.
2. Turn the bulb socket counter-
clockwise to remove it.
3. Pull the bulb straight out to
remove it from the socket.
4. Replace the bulb and reverse
the steps for installation.
357 . . .
–
–
–
–