3.3 Network
TCP/IP
3.3.1
The TCP/IP interface is shown as in Figure 3-11
Please refer to the following sheet for detailed information.
Parameter
Host Name
Ethernet Card
Figure 3-11
Function
It is to set current host device name. It max supports 32-digit
character.
Please select the Ethernet port. It is for the wire LAN by default.
Please note for the -W series product, it has the wireless
network card, and you can modify the default Ethernet port
setup.
Please note the device needs to reboot to activate the new
setup once you modify the default setup.
30