Related Manuals for Panasonic K-EW114L01E
Summary of Contents for Panasonic K-EW114L01E
- Page 1 HD IR Vari-Focal Fixed Network Camera Quick Start Guide K-EW114L01E Model No. Version 1.0.0...
- Page 2 Welcome Thank you for purchasing our network camera! This quick start guide is designed to be a reference tool for your system. Please keep this start guide well for future reference. Please open the accessory bag to check the items one by one in accordance with the list below. Contact your local retailer ASAP if something is missing or damaged in the bag.
-
Page 3: Daily Maintenance
Thunder-proof device is recommended to be adopted to better prevent thunder. The grounding studs of the product are recommended to be grounded to further enhance the reliability of the camera. 6. Daily Maintenance Please shut down the device and then unplug the power cable before you begin daily maintenance work. -
Page 4: Table Of Contents
Table of Contents Framework ........................... 1 Device External Cable ....................1 Framework and Dimension ..................2 Device Installation ........................3 Quick Configuration Tool ......................5 Overview ........................5 Operation ........................5 Web Operation ......................7 Network Connection ..................7 Login and Main Interface ................... 7... -
Page 5: Framework
1 Framework 1.1 Device External Cable You can refer to the following figure for device external cable information. See Figure 1-1 Figure 1-1 Please refer to the following sheet for detailed information. Port Port Name Connection Note Connect to standard Ethernet cable. Note: Ethernet Before making crystal head, pull the... -
Page 6: Framework And Dimension
1.2 Framework and Dimension Please refer to the following figure for dimension information. The unit is mm. See Figure 1-2 and Figure 1-3. Figure 1-2 Dimension illustration 1 Figure 1-3 Dimension illustration 2... -
Page 7: Device Installation
2 Device Installation Important • Make sure that the installation area is strong enough to hold the product, such as a concrete ceiling. • Install the camera in the foundation area of the architecture or where sufficient strength is assured. •... - Page 8 Figure 2-2 Step 5 Use inner hex screwdriver to loosen adjusting screw shown in Figure 2-2. Step 6 Adjust the device in all possible directions, and set its monitoring direction. Then, please adjust the viewing angle and focus. Notes: ・Viewing angle and focus adjustments shall be performed together with camera angle adjustment.
-
Page 9: Quick Configuration Tool
3 Quick Configuration Tool 3.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 3.2 Operation Step 1 Double click the “ConfigTools.exe”... - Page 10 Step 3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set. In the configuration tool search interface (Figure 3-1), please select a device IP address and then double click it to open the login interface.
-
Page 11: Web Operation
4 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 4.1 Network Connection Please follow the steps listed below for network connection. Make sure the network camera has connected to the network properly. - Page 12 Figure 4- 2 Web login If it is your first time to log in, system pops up warning information to ask you whether install web plug-in or not after you logged in for one minute. For detailed plug-in installation, please refer to the Web Operation Manual included in the resource CD.