Panasonic K-EF134L01E Quick Start Manual

Panasonic K-EF134L01E Quick Start Manual

Hd ir vari-focal dome network camera
Hide thumbs Also See for K-EF134L01E:

Advertisement

Quick Links

HD IR Vari-focal Dome Network Camera
Quick Start Guide
K-EF134L01E
Model No.
Version 1.0.0

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic K-EF134L01E

  • Page 1 HD IR Vari-focal Dome Network Camera Quick Start Guide K-EF134L01E Model No. Version 1.0.0...
  • Page 2: Important Safeguards And Warnings

    Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings 1.Electrical safety All installation and operation here should conform to your local electrical safety codes.
  • Page 3 Please do not dismantle the device; there is no component which can be fixed by users themselves in the machine. It may cause water leakage or bad image for the device due to unprofessional dismantling. It is recommended to use the device with thunder proof device in order to improve thunder proof effect. The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.
  • Page 4 Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package. Accessory Name Amount Network Camera Unit Quick Start Guide Installation Accessories Bag...
  • Page 5: Table Of Contents

    Table of Contents Structure ............................. 1 Components ........................1 Framework and Dimension ..................2 Device Installation ........................3 Installation Steps ......................3 Quick Configuration Tool ....................5 Overview ......................5 Operation ......................5 Web Operation ......................7 Network Connection ..................7 Login and Main Interface ...................
  • Page 6: Structure

    1 Structure 1.1 Components You can refer to the following figure for component structure. See Figure 1-1 Figure 1-1 Component structure Please refer to the following sheet for detailed information. Component Component Name Component 1 Dome body Component 2 Dome enclosure Port Port Name Note...
  • Page 7: Framework And Dimension

    1.2 Framework and Dimension Please refer to the following two figures for dimension information. The unit is mm. See Figure 1-2 Figure 1-2 Dimension illustration...
  • Page 8: Device Installation

    2 Device Installation Important • Make sure that the installation area is strong enough to hold the product, such as a concrete ceiling. • Install the camera in the foundation area of the architecture or where sufficient strength is assured. •...
  • Page 9 If user pulls out cable from side of cable channel, it must go through the U-shape channel on  dome pedestal, and take out cable from the side exit hole on pedestal. Step3 Adjust the device installation pedestal to the proper position and then pull cable through the exit hole on Installation surface.
  • Page 10: Quick Configuration Tool

    3 Quick Configuration Tool 3.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 3.2 Operation Step 1 Double click the “ConfigTools.exe”...
  • Page 11 Step 3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set. In the configuration tool search interface (Figure 3-), please select a device IP address and then double click it to open the login interface.
  • Page 12: Web Operation

    4 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 4.1 Network Connection Please follow the steps listed below for network connection. Make sure the network camera has connected to the network properly.
  • Page 13 Figure 4-2 Web login If it is your first time to log in, system pops up warning information to ask you whether install web plug- in or not after you logged in for one minute. For detailed plug-in installation, please refer to the Web Operation Manual included in the resource CD.

Table of Contents