Panasonic K-EW114L01E Operation Manual page 52

Please refer to the following sheet for detailed information.
Parameter
Sensitivity
Threshold
Delete All
Delete
3.4.1.2 Tampering
The tampering interface is shown as in Figure 3-26 and Figure 3-27.
Figure 3-25
Function
It is sensitivity of brightness as VMD is more possible to be
trigger with high sensitivity. You can set up to four areas. The
range is 0 - 100. The recommenced value is 30 - 70. The default
is 60.
It is to check target object area related to detection area. The
lower the area threshold, the easier to trigger VMD. You can set
up to four areas. The range is 0 - 100. The recommenced value
is 10 - 50.
Clear all areas.
Delete selected area.
49