Cateye Padrone Smart + CC-SC100B Online Manual page 7

1. Checking package contents
2. Install Cateye Cycling™
3. Pairing with smart computer
The following section explains how to format (initialize) the smart computer and then pair with
a smartphone.
• Pairing is necessary to use a smart computer or a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users.
Doing so may cause the smart computer to be paired with another device.
1. Pull free the smart computer's insulation sheet.
After pulling out the insulation sheet, return the battery holder and battery cover to their
previous locations.
2. Press the AC button on the smart computer.
The initialization screen is displayed.
Setup Flowchart
Important
Smart computer
Insulation
sheet
Battery holder
Close
Open