Cateye Padrone Smart + CC-SC100B Online Manual page 10

1. Checking package contents
2. Install Cateye Cycling™
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with optional
accessories or commercial sensors as required.
• Pair all sensors that you intend to use.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
1. Verify that [Connect] is set to ON in the
[Device].
Tap [Pair to Device] to start pairing.
2. Activate the sensor.
Activating the sensor
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
Tap [Pair]. The synchronized sensor is displayed on the [Device] screen and pairing is
completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor name.
* If you have paired a sensor capable of speed measurement, proceed to step 3.
Setup Flowchart
Important
Smartphone
(MENU), and then tap