Cateye Padrone Smart + CC-SC100B Online Manual page 14

Pairing a smart computer with a sensor
Pair a sensor that you want to use with smart computer.
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause the smart computer to be paired with another device.
• Pair all sensors that you intend to use.
Currently, only Bluetooth sensors that comply with Bluetooth Low Energy (BLE) profiles can
be used in Sensor Direct Mode.
1. From the measurement screen, press OPTION for 2 seconds to switch to
the sensor pairing screen.
* When the sensor pairing screen is left on for 1 minute, the smart computer returns to the
measurement screen.
2. Press SS/LAP to start pairing.
3. Activate the sensor that you want to pair.
Activating the sensor
The name of the synchronized sensor is displayed and pairing is completed.
Pairing with a sensor
Switching to Sensor Direct Mode
Important
(2 seconds)
Measurement
screen
Ready for
synchronization
Sensor pairing
screen
Sensor Synchronizatio
activated n complete