Paper Roll Replacement - Sharp compet cs-2850a Operation Manual

1. Lift the paper holder up. (Fig. 1)
2. Fold the leading edge of the paper roll 3 to 5 cm. (Do not fold it slantwise.) (Fig. 2)
3. Insert the paper roll from the left side of the paper holder and make sure the paper
roll is set in the proper direction (with the paper feeding from the bottom) as shown
in the figure. (Fig. 3)
4. Fold the paper holder down to the printer cover. Insert the leading edge of the
paper into the opening directly behind the print mechanism. (Fig. 4)
5. Lift the paper holder up. Press the paper feed key and feed the paper under the
edge of the paper cutter. (Fig. 5)
Fig. 1
Fig. 4
DO NOT PULL THE PAPER BACKWARDS AS THIS MAY DAMAGE THE PRINTER
MECHANISM.

PAPER ROLL REPLACEMENT

Paper holder
Correct
Fig. 3
Wrong
Paper cutter
Paper feed key
11
Correct
3 to 5 cm
(1-3/16" to
1-31/32")
Wrong
Fig. 2
Fig. 5