Errors; Decimal Sysyem - Sharp compet cs-2850a Operation Manual

There are several situations which will cause an overflow or an error condition. When
this occurs, the error symbol "E" will be displayed and all keys will electronically lock.
The contents of the memory at the time of the error are retained.
If an "0 . E" is printed on the tape at the time of the error, the
clear the calculator. If an "E" with any numerals except zero is printed on the tape or if
an "E" is not printed on the tape, the error may be cleared with the
the calculation can still be continued.
Error conditions:
1. Entry of more than 12 digits or 11 decimals.
This error can be cleared with the
2. When the integer portion of an answer exceeds 12 digits.
3. When the integer portion of the contents of the memory or grand total memory
exceeds 12 digits.
(Ex. 999999999999
4. When any number is divided by zero. (Ex. 5
Input override decimal feature
The calculator operates on a principle of floating decimal entries with preset decimal
answers.
1. An entry may contain up to 11 decimal places, regardless of the decimal selector
setting.
2. Answers will be printed to the preset decimal position except when an underflow
condition prevails.
Output override decimal feature
This feature enables an answer to be printed in the floating decimal when the result is
too small to be picked up within the range of the preset decimal.
EXAMPLE: Set decimal at 2
Enter

ERRORS

or key.
1 )
DECIMAL SYSTEM
5 Tape prints
77777
12
key must be used to
0 )
77 , 777 . =
0 . 00006428635
or key and
÷
5 .
∗