Sharp compet cs-2850a Operation Manual page 7

Division:
Add-on/Discount/Mark up:
•
" " position: Neutral
RATE SETTING MODE SELECTOR:
" " position: Set this selector to the "RATE SET" position before
RATE
SET
storing each rate.
• Enter the adding tax rate, then press
• To store a discount rate, press
• A maximum of 4 digits can be stored (decimal point is
not counted as a digit).
Note: • Be sure to set this selector to the "
•
" " position: Neutral
GRAND TOTAL MODE SELECTOR:
"GT" position: This selector will accumulate the following:
(The symbol "
1. Addition and subtraction totals obtained with the
2. Product and quotient totals obtained with the
3. Answers obtained with the
•
" " position: Neutral, GT OFF
ADD MODE SELECTOR:
"A/+" position – Effective only in addition and subtraction:
Use of the A/+ mode permits addition and subtraction of
numbers without an entry of the decimal point. When the
A/+ mode is activated, the decimal point is automatically
positioned according to the decimal selector setting.
EXAMPLES: Set A/+-• -A/x to A/+
A. Set decimal to 2
B. Set decimal to 3
Use of the
The calculator will automatically remember the second
number entered (the divisor) and the
The calculator will automatically remember the first
entered number and key functions for Add-on/Dis-
count/Mark up calculation.
.
after storing an each rate.
• Only one rate can be stored. If you enter a new
rate, the previous rate will be cleared.
∗
+ " will be printed.)
or key.
key.
Enter 123456
Enter 123456
, , and
5
instruction.
.
before pressing
•
or key.
1 , 234 . 56 +
Prints
123 . 456 +
Prints
keys will automatically
" position
or