Truma Trumatic E 2800 Operating And Installation Instructions page 16

11
Fitting the
Control panel
Attention:
Note:
1. Fig. H1:
Note:
1. Fig. H2:
Note:
Fig. H3:
Note:
12
Fitting the electronic
control unit
1. Fig. H4:
Attention:
Note: or
several
13
Electrical
connection
12 V/24 V
Prior to working on elec-
tric components the appli-
ance must be disconnect-
ed from the power supply.
Switching off at the con-
trol panel is not sufficient!
Attention: If the connec-
tions are transposed there
is a risk of cable burning.
This also rules out any
guarantee or liability
claims!
The red cable is positive,
the blue cable is negative!
Note:
Tip:
14
Gas connection
Attention: