Logik LBMULX11 Instruction & Installation Manual page 14

The mains connection for this product must have an all pole disconnection provided in the fixed wiring in
accordance with the local wiring regulations.
To avoid any potential hazard, you must follow these instructions when you install your appliance.
• The kitchen area should be dry and aired and equipped with
sufficient ventilation.
• When installing the oven, easy access to all control elements
should be ensured.
• This is a built-in oven. Coating or veneer used on fitted
furniture must be applied with a heat-resistant adhesive
(100°C). This prevents surface deformation or detachment of
the coating.
• Ensure that the cabinet is designed to be used with built-in
ovens.
• Ensure you have the dimensions given in the diagram for the
oven to be fitted.
• Once the oven is installed, fix with the four screws in the places
shown in the diagram.
14
LBMULX11_IB_final110520.indd 14 20/05/2011 4:47 PM