Electric Handle Heating; Information Before You Start - Stihl MS 460 Instruction Manual

English

Electric Handle Heating

Switching on the handle heating system
(depending on equipment version)
Set switch to F – to switch off, return
N
switch to the 0 position
Overheating during continuous use is
impossible. The heating system is
maintenance-free.
32

Information Before You Start

The four positions of the Master Control
lever
STOP
0
Stop 0 – engine off – ignition is switched
off
Operating position F – engine is running
or can start
Warm start n – this position is for
starting the warm engine
Cold start l – this position is for starting
the cold engine
Adjust Master Control lever
The throttle trigger lockout and throttle
trigger must be pressed simultaneously
to adjust the Master Control lever from
the operating position F to cold start l.
To set the Master Control lever to warm
start n, first set it to cold start l, then
push the Master Control lever into the
warm start n position.
Changing to warm start n is only
possible from the cold start l position.
When the throttle trigger is squeezed,
the Master Control lever returns from
warm start n to the operating
position F.
To switch off the engine, set the Master
Control lever to Stop 0.
MS 460