Electric Handle Heating; Starting / Stopping The Engine - Stihl MS 441 Instruction Manual

English
Mounting the cover plate (special
accessory)
Insert cover plate (1) with both tabs
N
(arrows) and fasten with screws (2)
When the mounting kit is used, the slide
must be in the winter position.
If engine trouble occurs, first check
whether use of the cover plate is
necessary.
28

Electric Handle Heating

Switching on the handle heating
(depending on model)
Move switch to F – move switch
N
back to 0 to switch off the heating.
There is no risk of overheating during
long periods of operation. The heating
system is maintenance-free.
Starting / Stopping the
Engine
Positions of the master control lever
STOP
0
Stop 0 – engine off – ignition is switched
off
Run F – Engine running or can start
Warm start n – this position is for
starting the warm engine – the master
control lever returns to run when the
throttle trigger is squeezed
Cold start l – this position is for
starting the cold engine
Adjusting the master control lever
The throttle trigger lockout and throttle
trigger must be pressed simultaneously
to adjust the Master Control lever from
run F to warm start n or cold start l.
MS 441