Install Post Bracket Assembly And Gate Bracket - Mighty Mule FM402 Installation Manual

Install Post Bracket Assembly and Gate Bracket

Step 1
3 1
Insert the / " x 1 / " bolt through the center hole of the post brackets
8 2
and post pivot bracket. Secure with a
DO NOT overtighten the lock nut (the post pivot bracket will have to be
adjusted later).
Step 2
Attach post bracket assembly to the rear mount of the opener with a
3
clevis pin and a / " washer. Secure the clevis pin with a hairpin clip.
8
Step 3
Attach gate bracket to the front mount of the opener with a clevis pin
3
and a / " bushing. Secure the clevis pin with a hairpin clip.
8
Step 4
With the gate in the fully open position and the opener arm fully retracted, adjust the post bracket assembly and
gate bracket until the opener is level. While holding the opener level, use C-clamps to temporarily secure the post bracket
assembly and gate bracket to the post and gate.
8
Mighty Mule FM402 Installation Instructions
3
/ " washer and
8
Clevis Pin
Rear Mount
3/8" Washer
Opener
Hairpin Clip
Post Bracket Assembly
Post Bracket Assembly
Fence Post
3
/ " lock nut.
8
Gate in Open Position
Opener Arm Fully Retracted
Level Opener
3 / " x 1 1 / " Bolt
8 2
Post Pivot Bracket
Post Bracket
3 / " Washer
8
3 / " Lock Nut
8
Front Mount
Bushing
Gate Bracket
Hairpin Clip
Gate Bracket
rev 12-14-15
Clevis
Pin