Sending Faxes; Receiving Faxes - Epson WF-2510 Basic Manual

Basic Guide
E
Select the group dial entry number that you want
to register. Use u or d to select a number, and
press OK.
F
Enter a name to identify the group dial entry. You
can enter up to 30 characters.
Color 2.5-inch display models:
Select Done and press OK to register the name.
Monochrome 2-line display models:
Press OK to register the name.
G
Select a speed dial entry that you want to register
in the group dial list. Use u or d to select the
entry and do the following to add it to the group.
Color 2.5-inch display models:
Press r. When you want to cancel the selection,
press r again.
Monochrome 2-line display models:
Press . When you want to cancel the selection,
press again.
H
Repeat step 7 to add other speed dial entries to the
group dial list. You can register up to 30 speed
dial entries in a group dial.
I
Press OK to finish creating a group dial list.

Sending Faxes

A
Place your original(s) in the Automatic
Document Feeder or on the scanner glass.
& "Placing Originals" on page 7
B
Press K to enter the fax mode.
C
Use the keys on the numeric keypad to enter the
fax number. You can enter up to 64 digits.
Monochrome 2-line display models:
If you want to send the fax to more than one
recipient, press OK after entering a one fax
number, and select Yes to add another fax
number.
Faxing
Note:
❏ To display the last fax number you used, press
.
❏ You can change fax quality and contrast settings.
When finished, press x again to return to the fax
mode top screen.
Color 2.5-inch display models:
Press x and select Send Settings - Quality or
Contrast.
Monochrome 2-line display models:
Press x and select Quality or Contrast.
❏ Make sure you have entered the header information.
Some fax machines automatically reject incoming
faxes that do not include header information.
D
Press one of the x buttons to start sending.
Note:
If the fax number is busy or there is some problem, this
product redials after one minute. Press
immediately.

Receiving Faxes

Follow the instructions to make settings to receive faxes
automatically. For instructions on receiving faxes
manually, see the PDF User's Guide.
A
Load plain paper in the rear paper feed.
& "Loading Paper" on page 6
B
Press K to enter the fax mode.
C
Press x to display the menus.
D
Make sure Auto Answer is set to On.
Color 2.5-inch display models:
Fax Settings > Receive Settings > Auto
Answer > On
Monochrome 2-line display models:
Fax Settings > Send/Receive Setup > Auto
Answer > On
12
to redial