Canon Elura 90 Instruction Manual page 95

Recording a Still Image on a Memory Card While
When you are recording a movie on a tape, you can record the same picture as a still
image on the memory card. Select the image quality from normal or fine.
I
~~~)
ICAMERA SETUP
1~ISTlLL
l.REC··OFF
1. Open the menu and select [CAMERA SETUP]. Select [STILL I.REC], set
it to
[UI
FINE] or
[UI
NORMAL] and close the menu.
2. While you are recording a movie, press the PHOTO button.
a
The size of the still image will be 640 x 480.
a
The quality of the still image is slightly lower than a still image recorded in
CARD CAMERA mode.
a
The still image cannot be recorded on a memory card when a fader, effect or
the multi-image screen is activated.
a
The still image cannot be recorded on a memory card when the widescreen
mode is selected.
a"
rn
(ijii"
appears when you press the PHOTO button when [STILL I.REC] is
set to [OFF].
1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other
information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The card access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape
is in playback pause mode.
-
c
(J)
:i'
cc
Q)
s:
ct>
3
o
~
(")
Q)
a.
95