Canon Elura 90 Instruction Manual page 87

el.ilM!il,C!"nl!!!\flei~,aJH;I~!jj!;l5fina!~Yw!i;YEdW!WfYt!t'dWnnmltllprn,WI",tINWI",'
,nnnmlt,·'p'ltm, :!rll,nU"iNU;nnu"tlPltlNl:nnnrUmn;• • ' ; • • l,mt:t
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
I
~~~)
I
AUDIO SETUP
1~112bit
AUDIO· .. STERE01
1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO],
select a setting and close the menu.
• STERE01: Plays back the original sound.
• STERE02: Plays back the added sound.
• MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.
• MIX/VARI.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.
2. If you have selected [MIX/VARI.], adjust the mix level: Open the menu
and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance
with the SET dial and close the menu.
Turn the SET dial down to increase the volume of Stereo 1 and up to increase the
volume of Stereo 2.
_ The camcorder resets to [STERE01] when you turn the camcorder off. However,
~
the mix balance is memorized by the camcorder.
-
87