Canon Elura 90 Instruction Manual page 28

28
Indicates the remaining time of the tape
in minutes.
"~"
moves during
recording.
"~END"
flashes when the
tape reaches the end.
• When the time left is less than 15
seconds, the remaining tape time may
not appear.
• Depending on the type of the tape, the
indication may not be displayed
correctly.
• "L\=l"
starts flashing in red when the
battery pack is empty.
• When you attach an empty battery
pack, the power may turn off without
displaying "~".
• The actual battery charge may not be
indicated accurately depending on the
condition under which battery pack
and camcorder are used.
"~"
flashes in red when the lithium
button battery is not installed, or when it
needs replacing.
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.