Canon Elura 90 Instruction Manual page 120

120
3. Turn the SET dial to select [PRINT] and press the SET dial.
• Printing starts. The print setting menu disappears when printing is complete .
• If you wish to continue printing, select another still image with the CARD +/- button.
o
Observe the following precautions during printing, otherwise printing may not
be performed correctly.
- Do not turn off the camcorder or the printer.
- Do not change the position of the TAPE/CARD switch.
- Do not detach the cable.
- Do not open the memory card cover or remove the memory card.
a
Images not recorded with this camcorder, uploaded from a computer, edited on
a computer and images whose file names have been changed may not be
printed correctly.
o
If the message "BUSY" does not disappear, disconnect the cable from
camcorder and printer and reconnect the camcorder to the printer.
o
Cancel Printing
Press the SET dial during printing. A confirmation dialog appears. Select [OK]
and press the SET dial.
- Canon Printer: Printing stops even if it is incomplete and the paper is fed
through.
- Canon CP-Printer CP-1 0/CP-1 00: A print in progress cannot be stopped.
Printing stops when the current print is finished, and the remaining prints are
canceled.
a
Printing Errors
If an error occurs during the printing process, an error message appears (OJ
139).
- Canon Printer: Resolve the error. When printing does not resume
automatically, select [CONTINUE] and press the SET dial. If [CONTINUE]
cannot be selected, select [STOP], press the SET dial and retry printing.
Refer also to the printer manual for details.
- Canon CP-Printer CP-1 0/CP-1 00: Select [STOP] or [RESUME] and press the
SET dial. (The [RESUME] setting may not appear with some error messages.
In that case, select [STOP].) Refer also to the printer manual for details.
- If the error still persists and printing does not restart, follow below procedure:
1. Disconnect the cable.
2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).
3. Reconnect the cable.
a
When you have finished printing:
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.