Elo Touch Solutions 90 Series User Manual page 5

Connector Panel & Interfaces
12V DC IN
Touch Display Connections
1. Connect the DP or VGA video cables between the monitor's DP/VGA input connectors and your DP/VGA
video source. Tighten the video cable's screws for best performance on VGA connector.
2. Connect the USB touch cable between the monitor's USB connector and your PC's USB port. (Not applicable for EXX9XL-0NXX models)
3. Connect a 12VDC power supply to the monitor's input power jack.
touch display
4. The ships in an ON state, video should be displayed on your monitor already.
User Manual - 90 Series
DP VGA OSD Connector Touch USB
COM
5