Elo Touch Solutions 90 Series User Manual page 10

Projected Capacitive Touch Technology
When connected to Windows 7 or 8 computers, the touch display can report 10 simultaneous touches.
When connected to Windows XP computers, the touch display reports single touches.
No additional drivers are required for this technology to work, it uses Windows HID drivers.
Refer to Section 2, "Installing the Touch Technology Software Drivers" to find instructions to download touch drivers for Windows XP
No calibration is required for this technology.
User Manual - 90 Series
IntelliTouch Plus Touchscreen Technology
When connected to Windows 7 computers, the touch display can report 2 simultaneous touches.
When connected to Windows XP computers, the touch display reports single touches.
The IntelliTouch Plus touchscreen can be re-calibrated to your displayed video image,
if needed, through the calibration function in the Elo driver control panel.
The IntelliiTouch Plus driver will only support multiple monitors if they
are all using the IntelliTouch Plus touch technology.
To use multiple IntelliTouch Plus monitors, double click on the EloConfig
desktop shortcut to open up the Elo Touchscreen Configuration screen
Select "Match Touch to Display..." to calibrate multiple monitors.
10