Guarantee Terms - Husqvarna AUTOMOWER 105 Operator's Manual

5 Guarantee terms

Husqvarna AB guarantees this product's functionality for a period of two
years (from date of purchase). The guarantee covers serious faults rela-
ting to materials or manufacturing faults. Within the guarantee period,
we will replace the product or repair it at no charge if the following terms
are met:
• The robotic lawnmower and the charging station may only be used
in compliance with the instructions in this Operator's Manual.
• Users or non-authorised third parties must not attempt to repair the
product.
Examples of faults which are not included in the guarantee:
• Damage caused by water seepage from underneath the robotic
lawnmower. This damage is normally caused by cleaning or irriga-
tion systems or holes/hollows in the working area when pools of
water are formed when it rains.
• Damage caused by lightning.
• Damage caused by improper battery storage or battery handling.
• Damage caused by using a battery that is not a Husqvarna AB
original battery.
• Damage caused by not using Husqvarna AB original spare parts
and accessories, such as blades and installation material.
• Damage to the loop wire.
The blades are seen as disposable and are not covered by the guaran-
tee.
If a fault occurs with your robotic lawnmower, please contact the dealer
(see Memo on page 2 for further instructions). Please have your receipt
and product serial number to hand for quicker assistance.
6 Maintenance
6.1 Cleaning
It is important to keep the robotic lawnmower clean. A robotic lawnmo-
wer with a lot of grass stuck to it will find it harder to travel up slopes,
perform worse and be exposed to greater wear and tear. For better ope-
rating reliability and longer service life: check and clean the robotic lawn-
mower regularly and replace worn parts if necessary. It is recommended
to clean using a soft brush.The blades are seen as disposable and are
not covered by the guarantee.
To reduce the risk of damage to electrical components in the robotic
lawnmower and its charging station, we recommend that all connections
to the charging station are disconnected (power supply, boundary wire
and guide wires) if there is a risk of a thunderstorm.
IMPORTANT INFORMATION
Never use a high-pressure washer or even running water to
clean the robotic lawnmower. Never use solvents for cleaning.
6.2 Storage
Store the robotic lawnmower standing on all four wheels or hanging
together with the charging station on the wall bracket specially designed
for Automower® robotic lawnmowers (available for Automower
310/315/420/430X/450X)
1157864-30,SLIM_HQ 105-450_ESPTITEN_r2.indd 59
ENGLISH
6.3 Charging station
Store the charging station and power supply indoors. The boundary loop
and the guide wire can be left in the ground. The ends of the wires
should be protected from damp by connecting them to an original coup-
ler or putting them in a container with grease for instance. If it is not pos-
sible to store the charging station indoors, the charging station must be
connected to the mains, the boundary wire and the guide wires the
entire winter.
6.4 Battery
The battery is maintenance-free, but has a limited service life of 2 to 4
years. Battery service life is dependent on the length of the season and
how many hours a day the robotic lawnmower is used. A long season or
many hours of use per day means that the battery must be replaced
more regularly.
Only charge the battery in the included charging station. Incorrect use
may result in electric shock, overheating or leaking of corrosive liquid
from the battery. In the event of leakage of electrolyte flush with water/
neutralizing agent, seek medical help if it comes in contact with the eyes.
For more detailed information on maintenance, please see the complete
Operator's manual on Husqvarna's website.
IMPORTANT INFORMATION
Do not try to recharge non-rechargeable batteries.
6.5 Blades
WARNING
Always use original blades and screws when repla-
cing. Only replacing the blades and reusing the
screw can result in a screw wearing during
mowing and shearing. The blades can then be pro-
pelled from under the body and cause serious
injury.
There are three blades on the robotic lawnmower, which are screwed
into the blade disc. All three blades and screws must be replaced at the
same time to obtain a balanced cutting system.
Use Husqvarna AB genuine blades only.
To replace the blades:
1. Set the main switch to position 0.
2. Wear protective gloves.
3. Turn the robotic lawnmower upside down.
4. Rotate the skid plate so that its holes align with the screw for the
blade.
5. Remove the screw. Use a straight slot or cross-tip screwdriver.
6. Remove the blade and the screw.
7. Screw on the new blade and the new screw. Check that the blades
can pivot freely.
®
English - 59
2016-02-19 16:04:29