Fleetwood 1998 American Tradition Owner's Manual page 64

ON ThE
ROAd
Illumination of the DO NOT SHIFT
or
SERVICE light
during vehicle operation indicates that the ECU has registered
a diagnostic code. Diagnostic codes can be displayed on the
display portion of the shift selector.
To display the codes:
1. Stop the vehicle, shift into NEUTRAL and set the parking
brake.
2. Simultaneously press the UP and DOWN arrow buttons one
time. The four digits of the current code and any pertinent
parameters are continuously flashed on the display.
3. Press the MODE button to cycle the display to the next code
with its pertinent information. Dashed indicate all stored
codes have been displayed.
See the Chassis Owner's Manual for additional information.
Your motor home is equipped with air brakes. Air brakes are
more sensitive than hydraulic brakes. Practice stopping in a
safe, unobstructed area until you get the feel of the brake
pedal.
The front air pressure gauge indicates front brake system air
pressure. The rear air pressure gauge indicates rear brake
system air pressure. Please note that the vehicle will not move
until air pressure is sufficient to release the brake safety
springs. A dash indicator will light and a buzzer will sound
until the proper operating pressure is reached.
DiAGNOSTic COdES
OJ,26
AMERiCAN TRAdirioN - CopyniqHr 1997, FIEETlVood ENTERPRisES, INC. All RiqHrs RESERVEd.