Fleetwood 1998 American Tradition Owner's Manual page 106

PlUMbiNC, SYSTEMS
SUPPlYUNE
r
HOTWATER
DAAlNUNE
~ ~
WATER TANK
1~llETIOUTLET
CrTYWATER
Water Tank Fill Valves and Plumbing
~='---VALVE2
HOlWATEA
COLDWATER DRAIN
DRAIN
5. Be sure 12-volt DC power is available, and turn the water
pump ON. The pump will draw the solution and pump it into
the water tank. Pump all the solution into the tank.
6. Turn water pump OFF.
7. Disconnect the hose from the WINTERIZE water inlet.
8. On model40VS turn VALVE 1 horizontal. On models 38T
and 38TF turn VALVE 1 handle towards the front of the
vehicle.
9. Connect the potable water hose (the same one used to
connect to an external water supply) to the CITY WATER
inlet and an external water supply valve.
10. Turn the TANK BYPASS valve to the left (counterclockwise)
to open it.
HOTWATER
DRAINUNE
11. Turn the water supply valve ON to fill the water tank. Monitor
the tank filling continuously.
AMERiCAN TRAdiTiON - CopYRiql1T 1997, flEETWood ENTERPRisES, INC. All Riq/;TS RESERVEd.