Parkinq Brake - Fleetwood 1998 American Tradition Owner's Manual

Reset procedure to clear DO NOT SHIFT light and restore
operation.
When the DO NOT SHIFT light comes on, a reset proce-
dure can be performed to clear the system. If necessary,
continue to operate the vehicle and have the transmission
checked at the earliest opportunity.
»
Bring vehicle to a stop at a safe location and apply
parking brakes.
»
Simultaneously press the UP and DOWN arrow
buttons one time.
»
Press and hold the DISPLAY MODE button until a
tone is heard. Then release the button and the transmis-
sion will return to the direction attained prior to clear-
ing the active indicator.
SERVICE Indicator
The SERVICE INDICATOR indicates that the transmis-
sion is operating with reduced capabilities. Although the
transmission can continue to operate, promptly seek
service to minimize the potential for damage. A diagnostic
code will be registered in the ECU when SERVICE has
been indicated.
If this light illuminates, check for a transmission overheat
condition on the instrument panel gauge or overtemp light.
If the transmission fluid temperature is outside the normal
limits, stop the vehicle at a safe location and summon
service. If the temperature is within limits, the vehicle may
be carefully driven to a service facility if conditions can be
negotiated safely.
""I
NOTE
If the condition is tempo-
rary, the DO NOT SHIFT
light will not come back
on and your vehicle will
operate in a normal
manner.
If the condition is not
temporary, the DO NOT
SHIFT light may come
back on and the trans-
mission may remain in-
hibited or operate in
a
normal manner until the
condition is detected
again. The type of op-
eration permitted by the
ECU will depend on the
type of condition.
AMERiCAN TRAdirioN - CopYRiqHT 1997, FLEETWood ENTERPRiSES, INC. All RiqlfTS RESERVEd ..
OJ,27