Fleetwood 1998 American Tradition Owner's Manual page 101

4. In the plumbing utility compartment, turn the WATER TANK
BYPASS valve, the COLD WATER DRAIN valve, and the HOT
WATER DRAIN to the right (clockwise) to close them, if
necessary.
5. On model40VS turn the handle on VALVE 2 horizontal. On
mOdels 38T and 38TF, turn the handle on VALVE 2 horizontal
and turn the handle on VALVE 1 towards the front of the
vehicle.
6. Attach the free end of the city water supply hose to the city
water inlet fitting. Tighten securely.
7. Turn the city water supply valve ON. The system is now
pressurized by the city water supply. Water is available at the
exterior utility washdown faucet and all interior faucets.
8. Open each faucet in the galley and bathroom. After any
sputtering stops and water flows freely, close the faucet.
As long as you are connected to a city water supply, you have
pressurized water at all faucets. You do not need to lUn the water
pump. With the valves set this way, the water pump is isolated
from the system.
To disconnect the city water:
1. Turn OFF the city water supply.
2. Remove the hose from the city water supply valve.
3. Drain and store the hose on shelf provided.
- - - -
- - -
- -
- - - " - - " " " - -
PlUMbilVCj SYSTEMS
AMERicAN TRAdirioN - CopYRiqln 1997, FlEETWood ENTERPRisES, INe. All Riq/ITS RESERVEd.