3
WORK
3.5
Checking the headlight setting
3.6
Adjusting the headlight range
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark a distance
Guideline
Distance
–
Position the vehicle vertically a distance
Guideline
Distance
400726-10
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver.
»
If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
(EXC‑F EU, EXC‑F AU, All XCF-W models, All SIX DAYS models)
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
L02459-10
–
Tighten screw
(EXC-F US)
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
M00190-10
–
Tighten screw
under the first mark.
p. 10)
.
Info
A change in weight on the vehicle may require a correction of the head-
light range.
.
.
Info
A change in weight on the vehicle may require a correction of the head-
light range.
.
5 cm (2 in)
away from the wall.
5 m (16 ft)
p. 10)
10