KTM 350 EXC-F EU 2015 Setup Instructions page 18

3 WORK
3.17 Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
3.18 Setting the speedometer functions
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
–
Repeatedly press the button
Setting the Km/h
–
Press the button
Setting the Mph
–
Press the button
400329-01
–
Wait 3–5 seconds
The settings are stored.
Info
If no button is actuated for 10–12 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
Info
If no button is pressed for 10–12 seconds, the settings are automatically
stored.
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the Setup
400318-01
menu is closed.
–
Repeatedly press the button
The selected function flashes.
Activating the function
–
Press the button
The symbol continues to appear in the display and the next function
appears.
Deactivating a function
–
Press the button
The symbol disappears in the display and the next function appears.
briefly until H appears at the bottom right of the
for 2–3 seconds.
briefly until Km/h/Mph flashes.
.
.
briefly until H appears at the bottom right of the
for 2–3 seconds.
briefly until the desired function flashes.
.
.
16