KTM 350 EXC-F EU 2015 Setup Instructions page 11

3 WORK
3.4 Refitting the headlight mask with the headlight
–
Detach electrical plug-in connector
the headlight.
M00189-10
Main work
(EXC‑F EU, EXC‑F AU, All XCF-W models, All SIX DAYS models)
–
Connect the electrical plug-in connector
M00127-11
–
Position the headlight mask and fix it with rubber straps
–
Position the brake line and wiring harness. Put the clamp on and mount and
tighten screw
M00143-11
(EXC-F US)
–
Connect the electrical plug-in connector
M00189-11
–
Position the headlight mask and fix it with rubber straps
–
Position the brake line and wiring harness. Put the clamp on and mount and
tighten screw
M00188-11
Finishing work
–
Check the headlight setting. (
Info
Ensure the holding lugs engage in the fender.

.
Info
Ensure the holding lugs engage in the fender.

.
p. 10)

and take off the headlight mask with

.

.

.

.
9