Replacing The Stator And The Engine Speed Sensor; Removing The Rotor; Removing The Drive Chain; Removing The Electric Starter - SHERCO 2015 450 SEF-R Workshop Manual

REMOVING THE ENGINE
❱❘ Changing the stator and the engine
speed sensor
• Remove the 2 screws from the sensor (2) and
the two screws from the stator (1).
• Set up the new parts.
• Reinstall the screws with red thread lock
and tighten to 7 Nm,
❱❘ Removing the rotor
• Use the rotor maintenance tool 4753.
• Unblock the central nut.
• Extract the flywheel with the flywheel
extractor R462.
❱❘ Removing the drive chain
• Unscrew the drive chain guide plates (1) and (2).
• Remove the drive chain.
❱❘ Removing the electric starter
• Unscrew the two screws (1) and pull
horizontally to the left.
Remove the oil filter, if not done yet.
16
450 SEF-R
2
2
1 1
1
1
2