Clutch Lever Adjustment; Idle Speed Adjustment; Throttle Cable Slack Adjustment - SHERCO 50 SE 2022 Owner's Manual

SETTINGS

CLUTCH LEVER ADJUSTMENT

C

IDLE SPEED ADJUSTMENT

THROTTLE CABLE SLACK ADJUSTMENT

A
B
A
B
To adjust the clutch lever
A
and use the adjusting fitting
C
play of 5mm.
To perform this operation correctly it is recommended
that it be performed on a hot engine. Using an
electronic rev counter that is connected to the spark
plug cable.
Utilize a screwdriver on the adjuster screw
set the idle to 1900 rpm.
In the case where the throttle cable slack is greater
than 3 mm, measured from the edge of the handle,
it is necessary to perform an adjustment using the
adjuster on the carburetor
lift the rubber cover
to obtain a free
B
and
A
.
B
83