8.3
Commissioning
•
Make sure that:
- the boiler is connected to the electrical
supply,
- the gas service cock is open.
•
Push the on/off switch until the symbol
"I" appears.
The operating indicator on the control
panel turns on: the boiler is ready to
run.
•
Push MODE to modify the operating
mode of the boiler. The symbol ◄ is
then situated opposite the selected
mode:
Domestic hot water +
Timed central heating
Central heating and
domestic hot water
Central heating only
Domestic hot water only
Appliance frost protection
Adjustment of the time and
time/day
day of the week
Heating programme
prog
adjustment
8.4
Temperature adjustment
8.4.1 Domestic hot water temperature
adjustment
•
Push – or + on the
domestic hot water temperature.
The ECO symbol remains until 49°C.
8.4.2 Heating temperature adjustment
•
Observation:
A quick push on +/- or
displays the temperature value previously
selected
8.5
8.5.1 Time adjustment
•
•
•
8.5.2 Adjustment of the day of the
•
side to adjust the
7
Push – or + on the
the water temperature of the central
heating.
The ECO symbol remains until 49°C.
Adjustment of the time and day of
the week
Push MODE until the symbol ►
appears opposite "time/day".
The hours section flashes.
Push + or - on the «time/day» side to
enter the hour, and then push MODE to
confirm.
The minutes section flashes.
Push + or - on the «time/day» side
to enter the minutes, and then push
MODE to confirm.
The days section flashes.
week
Push + or - on the «time/day» side to
enter the day of the week, and then
push MODE to confirm.
side to adjust
/
side