Saunier Duval SD 30e Instructions For Use Installation And Servicing
  1. Manuals
  2. Brands
  3. Saunier Duval Manuals
  4. Boiler
  5. SD 30e
  6. Instructions for use installation and servicing
Saunier Duval SD 30e Instructions For Use Installation And Servicing

Saunier Duval SD 30e Instructions For Use Installation And Servicing

Fanned flue combination boiler
Hide thumbs
Table of Contents

Advertisement

Quick Links

Installation and Servicing

SD 30e
G.C. No. 47-920-16
Fanned Flue

Combination Boiler

This is a Cat I
The instructions consist of three parts, User, Installation and Servicing Instructions, which include the Guarantee Registration Card.
The instructions are an integral part of the appliance and must, to comply with the current issue of the Gas Safety (Installation and Use)
Saunier Duval appliances' are manufactured to the very highest standard so we are pleased
In the centre pages are to be found your Guarantee Registration Card, which we recommend you complete and
If this card is missing you can obtain a copy or record your registration by telephoning the Heatcall Customer
Our Guarantee gives you peace of mind plus valuable protection against breakdown by covering the cost of:
All replacement parts
All labour charges
All call-out charges
One Contact Local Service

Instructions for Use

T o b e l e f t w i t h t h e u s e r
Appliance
2H
Regulations, be handed to the user on completion of the installation.

Guarantee Registration

Thank you for installing a new Saunier Duval appliance in your home.
to offer our customers' a Comprehensive First Year Guarantee.
return as soon as possible.
Service number 01773 828100.
REGISTER YOUR SAUNIER DUVAL APPLIANCE
Customer Services:
Tel: (01773) 828100
Fax: (01773) 828070
FOR 1ST YEAR GUARANTEE PROTECTION
CALL 0208 247 9857
Nottingham Road, Belper, Derbyshire. DE56 1JT
Tel: (01773) 824141 Fax: (01773) 820569
221873B.07.01
Hepworth Heating Ltd.,
General/Sales enquiries:

Advertisement

Table of Contents
loading

Related Manuals for Saunier Duval SD 30e

Summary of Contents for Saunier Duval SD 30e

  • Page 1: Instructions For Use

    Guarantee Registration Thank you for installing a new Saunier Duval appliance in your home. Saunier Duval appliances' are manufactured to the very highest standard so we are pleased to offer our customers' a Comprehensive First Year Guarantee. In the centre pages are to be found your Guarantee Registration Card, which we recommend you complete and return as soon as possible.

  • Page 2: Table Of Contents

    Important Information Testing and Certification This boiler is tested and certificated for safety and performance. It is therefore important that no alteration is made to the boiler, without permission, in writing, from Hepworth Heating Ltd. Any alteration not approved by Hepworth Heating Ltd., could invalidate the certification, boiler warranty and may also infringe the current issue of the Statutory Requirements, see Section 1.4.

  • Page 3: Introduction

    Instructions for Use Introduction The colours of three core flexible cable are, blue - neutral, brown - live, green and yellow - earth. Please read these instructions and follow them carefully for the As the markings on your plug may not correspond with these safe and economical use of your Combination boiler.
  • Page 4 Instructions for Use Setting Instructions for Electro/mechanical To Light the Boiler Clock 1. Check that all four isolating valves are open, the levers in line with the valvebody, see diagram 2. This clock has a twenty four hour dial, that is, 1pm is 13. 2.
  • Page 5 Instructions for Use Summer / Winter Selector Button SAFETY VALVE Adjust the central heating water temperature control knob “N” to DISCHARGE PIPE POSITION desired setting. For central heating set button “J” to Winter light “K” will illuminate. The main burner will light. The burner ON light “D” will illuminate.
  • Page 6 Instructions for Use CONTROLS SANITARY WATER FASCIA TEMPERATURE SUMMER/ WINTER PRESSURE ‘M’ ‘J’ CONTROL KNOB ‘A’ BUTTON GAUGE ‘F’ ‘L’ CLOCK TIMER ‘P’ ‘C’ ‘H’ RESET ‘G’ BUTTON ‘D’ ‘Q’ ‘K’ ‘E’ CENTRAL HEATING MAINS WATER ELECTRIC TEMPERATURE ‘B’ SWITCH ‘N’...

  • Page 7: General Data

    1 General Data Optional flue kits are available Horizontal top outlet and Vertical. Diagram 1.1 EXTD. EASYFIT TABLE 1 1.1 Installation Lift Weight 31.7kg (69.89b) Materials and equipment should be fit for their purpose and of suitable quality and workmanship. Total Weight 41.1kg (90.61lb) 1.2 Important Notice...

  • Page 8: Heating System Controls

    1 General Data 1.9 Heating System Controls 1.7 Gas Supply The heating system should have installed: a timer and room The gas installation shall be in accordance with the rules in force thermostat controlling the boiler. in the countries of destination. Thermostatic radiator valves may be installed, however they The supply from the governed meter must be of adequate size must not be fitted in a room where the room thermostat is...

  • Page 9: Boiler Position

    2 Boiler Position 2.1 Location 25 ABOVE THE TOP OF THE BOILER CASE OR THE FLUE ELBOW IF FITTED This boiler must be installed in accordance with the rules in force in the countries of destination. This boiler is not suitable for fitting outside. Any electrical switch must be positioned so that it cannot be touched by a person using the bath or shower.

  • Page 10: Flue And Ventilation

    3 Flue and Ventilation 3.1 General 3.6 Room Ventilation The flue must be installed in accordance with the rules in force Ventilation must be provided in accordance with the rules in in the countries of destination. force in the countries of destination. The boiler is room sealed, so where the boiler is fitted in a room or space, a permanent air 3.2 Terminal Position vent is not required.

  • Page 11: Heating System

    The remaining circulating pressure head available from the boiler is shown in diagram 4.1, Saunier Duval pump. When fitting the boiler into an existing system, special care should be taken to drain the entire system, including radiators, 4.5 Expansion Vessel...

  • Page 12: Domestic Hot Water System

    4 Heating System ALTERNATIVE METHODS OF FILLING DOMESTIC WATER METHOD 1 COMBINED CHECK VALVE HEATING TEMPORARY AND VACUUM SYSTEM HOSE BREAKER BOILER SERVICING HOSE ADDITIONAL VALVE UNIONS EXPANSION VESSEL (if required) SUPPLY STOP SUPPLY VALVE OPTIONAL FILLING PIPE KIT AVAILABLE METHOD 2 No.

  • Page 13: Installation Preparation And Gas/Water Connections

    6 Installation Preparation and Gas / Water Connections The installation requires the following components :- SAFETY DISCHARGE PIPE ROUTING POSITION Plumbing jig Carton Boiler Carton Flue Pack 6.1. Plumbing Jig Remove from the wall template, then follow the instructions given on the template. COLD HEATING Note: Leaving the service cock bracket (lower jig) fixing screws...

  • Page 14: Flue Preparation

    7 Flue Preparation EXTENDED TOP OUTLET FLUE PACK 'X' plus 254mm (RH) = flue length 'X' plus 10mm (LH) = flue length FLUE LENGTH FLUE LENGTH MAX 840mm (extended) MAX 840mm (extended) EASYFIT MAX 570mm (easyfit) MAX 570mm (easyfit) 'X' plus 282mm (RH) = flue length 5mm* 15mm 'X' plus 38mm (LH) = flue length...
  • Page 15 7 Flue Preparation 7.1 Flue Position and Length Determine flue application, length and terminal position before starting. Refer to diagram 7.1. Note: The Easyfit Top Outlet Flue Pack and the Extended Top Outlet Flue Pack contains a flue duct extension piece complete OPTIONAL with "O"...

  • Page 16: Mounting The Boiler

    8 Mounting the boiler 8.1 Boiler Mounting COMBUSTION Remove the inner case front, secured by two clamps at the CHAMBER PANEL bottom lift up and unhook from the threaded lugs at the top, see RETAINING diagram 8.1. LUG (4) Remove the combustion chamber panel transit screws, see diagram 8.2.
  • Page 17 8 Mounting the boiler 8.2 Water and Gas Connections RETAINING LUG Locate the boiler water pipes and gas supply pipe making sure the washers are retained in the tubing nuts onto the isolation valves, fully push the boiler back, see diagram 8.8. BOILER Ensure the bottom boiler bracket is sitting on top of the service cock bracket, see diagram 8.6.
  • Page 18 8 Mounting the boiler 8.5 Rear Outlet Flue Fixing 8.6 Top Outlet Side or Rear Flue Fixing Make sure that the ductings do not slope down towards the Position the restrictor plate supplied in the loose items pack, boiler. between the flue elbow and boiler , (gasket facing upwards). Fit the flue elbow to the restrictor plate and top of the boiler using Fit the air duct into the flue spigot by pulling the air duct into the the four screws supplied, see diagram 8.7.
  • Page 19 8 Mounting the boiler RESTRICTOR TABLE FLUE MAX FLUE RESTRICTOR MAX FLUE RESTRICTOR OUTLET LENGTH PLATE LENGTH PLATE CASE REAR UP TO 2.5m TOP LHS UP TO 2.5m 2.5m TO 3.5m TOP RHS UP TO 2.5m 2.5m TO 3.5m TOP REAR UP TO 2.5m 2.5m TO 3.5m Make sure that the ductings do not slope down towards the...

  • Page 20: Electrical Connections

    9 Electrical Connections 9.1 Supply Cable Connection SECURING CAUTION: To prevent an induced current from switching the CONTROLS SCREW (2) central heating on, when not required, it is important that the FASCIA heating system control cables are separated from the other mains supply cables.

  • Page 21: Electrical Connections

    9 Electrical Connections TO BOILER EXTERNAL CLOCK INTEGRAL CLOCK TO BOILER RED LINK. 5 WAY TERMINAL BLOCK 5 WAY TERMINAL BLOCK REMOVE WHEN CONNECTING ANY HEATING SYSTEM CONTROLS (R1) (R2) (R1) (R2) LINK MAINS POTENTIAL FROST STAT. SWITCH CONTACTS CLOCK JUNCTION TIME CONTROL...

  • Page 22: Commissioning

    10 Commissioning Please ensure the “Benchmark” logbook is completed and left Pressurise the system until the pressure is 1.5bar. Check the heating system and boiler for water soundness. with the user. Check the operation of the safety valve by turning the safety 10.1 Filling Domestic Water Circuit valve knob in the direction of the arrow.
  • Page 23 10 Commissioning If the maximum pressure cannot be obtained, check that the gas 10.8 Ignition Rate supply of adequate size, refer to Section 1.7. Set the mains electrical switch “B” to 0, located on the controls 10.5 Gas Rate Modulation fascia, see diagram 3.
  • Page 24 10 Commissioning 10.9 Temperature Settings The maximum temperature setting for the domestic hot water WRAP AROUND outlet is 65 The maximum flow temperature setting for central heating is 10.10 Heating System - Commissioning Check that all remote controls and integral clock are calling for heat.

  • Page 25: General Data

    11 General Data 11.1 Servicing or Replacing Parts 11.3 Isolation of Boiler To ensure the continued efficient and safe operation of the Before starting any servicing or the replacement of parts, isolate boiler it is recommended that it is checked and serviced as the boiler from the electrical supply at the external isolator.

  • Page 26: Servicing

    12 Servicing 12.3 Cleaning Heat Exchanger 12.4 Cleaning Main Burner Place a sheet of paper or similar in the combustion chamber, to Use a vacuum cleaner or suitable brush to clean the burner act as a collector for deposits removed. thoroughly, making sure that all burner ports are clear and unobstructed.

  • Page 27: Fault Finding

    12 Servicing 12.5 Service Checks 3.5mm Inspect the spark and sensing electrodes, Clean or renew if necessary, refer to Sections 14.4 and 14.5. Check the main injector, cleaning or renewing as necessary, refer to Section 14.3. Before replacing any of the parts removed during servicing, inspect the condition of all seals and joints, renewing them as necessary.
  • Page 28 13 Fault Finding 13.2 Clock/Timer ON/OFF PERMANENT TERMINAL If the clock has failed it can be bypassed by disconnecting the SWITCH MAINS 230V-50HZ BLOCK plug and reconnecting the link, see diagram 13.1. brown brown Gain access by removing the two screws securing the controls facia, see diagram 9.1.
  • Page 29 13 Fault Finding 13.3 Electrical Before replacing any part please read points below:- Replacement of parts must only be carried out by a competent Preliminary electrical system checks, as outlined in a Multimeter person. Instruction book, are the first checks to be carried out during a fault finding procedure.
  • Page 30 13 Fault Finding Check appliance installation and that it is mechanically correct. Check filters are clean and allow adequate water flow. Is mains L.E.D. illuminated. Check fuses and power supply. Open a tap to create demand. If lockout L.E.D. is illuminated, press reset. Demand L.E.D.
  • Page 31 13 Fault Finding NB. The clock can be by passed by refitting the plug link which should be inside the clock timer cover. Check continuity of clock/timer harness, ensure an electrical supply is available, ensure that remote controls are calling for heat. Isolate the boiler from electrical supply remove outer case.

  • Page 32: Replacement Of Parts

    14 Replacement of Parts 14.1 Fan CLEAR AIR PRESSURE ELECTRICAL Before starting refer to Section 11. TUBES CONNECTION Disconnect the two electrical connectors at the fan by pulling the boots not the wires, see diagram 14.1. Remove the two flexible tubes from the fan, see diagram 14.1. Note: When replacing the tubes from the air pressure switch ensure the lower (red) tube from the fan connects to the upper connection of the switch.
  • Page 33 14 Replacement of Parts 14.6 Boiler Overheat Cutoff THERMISTOR GAS CONTROL CENTRAL VALVE Before starting refer to Section 11. HEATING CLIP Disconnect the electrical connections, unclip to remove the overheat cutoff, see diagram 14.4. OVERHEAT 14.7 Pressure Gauge CUTOFF Before starting refer to Section 11. Remove case base, see diagram 10.3.
  • Page 34 14 Replacement of Parts SECURING SCREW CONTROL BOARD SUPPORT IGNITION LEADS SENSING LEAD Diagram 14.8 POSTS (4) MULTI PIN SOCKET CONNECTORS HEAD MULTI PIN CONTROL CAPSCREW CONNECTOR VALVE CAREFULLY BEND THE RETAINING CLIPS FORWARD TO RELEASE MULTI PIN Diagram 14.7 CONNECTORS 14.10 Pump Before starting refer to Section 11.
  • Page 35 14 Replacement of Parts Remove the clip to remove the water pressure switch, see 14.17 Flow Regulator / Filter diagram 14.11. Before starting refer to Section 11. Remove the plastic cover. Drain domestic hot water. Remove the electrical connectors. Remove outer case front as section 11.4. Refer to wiring diagram 14.29 when fitting.
  • Page 36 14 Replacement of Parts DIVERTER SWITCH WATER INLET FILTER RETAINING CLIP 'O' RING ELECTRICAL SECURING REGULATOR DIVERTER VALVE PLUG) Diagram 14.12 Diagram 14.15 Make sure RETAINING SECURING CLIP O RING spindle is CLIP located PRESSURE properly DIFFERENTIAL MICRO SWITCH DIVERTER VALVE SECURING Diagram 14.16...
  • Page 37 14 Replacement of Parts Remove the bypass tube refer to Section 14.22. 14.20 Hydro Block Assembly Left hand side (see diagram 14.18) Remove the right hand side of the hydro block. See inset on diagram 14.18 to remove heating return filter. Before starting refer to Section 11.
  • Page 38 14 Replacement of Parts Disconnect the gas service cock union. Remove securing Disconnect the safety valve discharge pipe from the boiler. screws and push Disconnect the mains supply cable at the connector block on back to release the back of the controls fascia. Remove the two screws at the service cock bracket.
  • Page 39 14 Replacement of Parts 14.26 Heat Exchanger AIR VENT CAP AUTOMATIC AIR VENT Before starting refer to Section 11. Unhook the combustion chamber front, see diagram 8.2. SECURING Remove the fan and flue collector, refer to Section 14.1. CLIP Remove the burner see Section 14.2. Refer to diagram 14.24 and remove the two side insulation pieces.
  • Page 40 14 Replacement of Parts COMBUSTION REAR CHAMBER INSULATION FRONT PANEL SIDE INSULATION SIDE INSULATION FRONT INSULATION Diagram 14.25 14.27 Combustion Chamber Insulation MICA WINDOW Remove outer case front as section 11.4. Remove the inner case front as Section 11.5. Unhook the combustion chamber front, see diagram 8.2. Remove the burner see section 14.2.
  • Page 41 14 Replacement of Parts 14.30 Air Pressure Switch ELECTRICAL Before starting refer to Section 11. CONNECTION (4) Disconnect the two electrical connectors at the air pressure SECURING switch, see diagram 14.27. SCREW (4) Remove the flexible tubes from the switch. Remove the air pressure switch, secured with two screws.
  • Page 42 14 Replacement of Parts AIR PRESSURE SWITCH GREY WHITE or- ORANGE BLUE bk- BLACK YELLOW br - BROWN PURPLE g/y- GREEN/ YELLOW DIVERTER SWITCH THERMISTOR (CENTRAL HEATING) BOILER DOMESTIC OVERHEAT HOT WATER FLOW CUT-OFF THERMISTOR MICRO SWITCH (DOMESTIC HOT WATER) PLUG PRESSURE DIFFERENTIAL...

  • Page 43: Spare Parts

    15 Spare Parts 15.1 Part Identification The key number in diagram 15.1 and the first column of the list will help identify the spare part. 15.2 Ordering When ordering any spare part, please quote the part number and the description from the list together with the model name and serial number information from the data label.
  • Page 44 15 Spare Parts Diagram 15.1 Because of our constant endeavour for improvement, details may vary slightly from those shown in these instructions. 221873B...

Table of Contents