Connection To The Pcb; External Controls Connection; Separation Of High And Low Voltage Cables - Saunier Duval ThemaPLUS CONDENS F 30 E Instructions For Use Installation And Servicing

• Open the installer connection side (2) to
carry out the electrical connections.

5.8.2 Connection to the PCB

1
2
30 mm max.
Legend
1 Terminal block
2 Electrical wires
3 Sheath
Warning ! When connecting electrical
cables to the terminal block on the PCB:
• Keep a 30 mm maximum distance
between the terminal block (1) and the
stripped sheath (3).
• Otherwise, fasten the electrical wires
(2) together with a cable tie.
• Secure the cables with the electrical
box cable clamp.
5.8.3 Separation of high and low
voltage cables
Legend
1 Main board
2 Passage for high voltage
3 Passage for low voltage
• Respect passage (2) for low voltage
cables and (3) for high voltage cables.
3
1
2
3

5.8.4 External controls connection

5
1
4
3
2
Legend
1 Neutral
2 Room Thermostat
3 Live
4 Frost Protection
5 Link wire
Important ! Remove link wire (5) when
fitting external controls.