Table of Contents
Advertisement
Chapter 4 Wall Mounting
8. Screw/attach the camera onto the camera stand.
9. Connect the power cable into the back of the camera, and then insert the
grommet between the camera and the power input cover, as shown in the
following figures.
CAUTION: Ensure that the grommet is positioned properly to
prevent water from entering the camera.
10. Rotate the power input cover clockwise to tighten it, providing a watertight
seal for the power cable.
20
Figure 6: Attaching the Camera
Figure 7: Connecting the Power Cable
Figure 8: Securing the Power Cable
OC835-ADT Outdoor HD Camera Installation Guide
Hide quick links:
Advertisement
Table of Contents
