ADT Pulse OC835-ADT Quick Installation Manual page 17

10. When the Camera Details screen appears, showing that the camera has been
enrolled, assign the OC835-ADT a unique name (usually based on the location
of the camera) in the Name field, and then click Save.
The Pulse enrollment is complete. The newly-added device appears in the
Cameras list.
11. At the top left of the screen, click Go Back.
12. Disconnect the camera from power.
13. Install the camera in its final location.
For Wall Mounting, refer to Chapter 4.
OC835-ADT Outdoor Day/Night HD Camera Installation Guide
Chapter 3 ADT Pulse Enrollment
17